DE Jobs

Search from over 2 Million Available Jobs, No Extra Steps, No Extra Forms, Just DirectEmployers

Job Information

Federal Aviation Administration Aviation Safety Inspector (Airworthiness) (General Aviation Principal Maintenance Inspector) in Charlotte, North Carolina

Summary The incumbent of this position is assigned to the Flight Standards Service. The incumbent is responsible for applying substantial knowledge of and experience with Title 14 of the Code of Federal Regulations (14 CFR) for the development and implementation of standards, programs, and procedures for Federal Administration (FAA) field personnel and the public governing all matters to general aviation maintenance safety issues. Responsibilities The aviation safety inspector (ASI) receives administrative direction from management in terms of broadly defined missions or functions. The ASI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The ASI provides policy assistance to field level ASIs on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled. Some FG-14 assignments involve Service wide responsibility for application of expert knowledge of general aviation maintenance. Other FG-14 inspectors establish technical procedures and performance yardsticks and review maintenance programs, or who have problems of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity and the organizations monitored are major factors in the industry. ASIs at the FG-14 level establish technical procedures and performance indexes and review complete maintenance programs for general aviation organizations who are leaders in the aviation industry, or who have problems of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity. The following assignments are illustrative: 1. As a Service wide expert on a particular type of aircraft: -- Advises other inspectors of major changes; -- Evaluates new training methods and equipment; -- Serves on boards that evaluate incidents, accidents, complaints, and other serious problems relating to the aircraft. 2. As the principal representative in regulatory surveillance of general aviation activities, exercises certificate authority; or evaluates maintenance activities and complete aircraft overhaul facilities (By comparison, FG-13 employees exercise certificate authority over less complex air carriers or perform major portions of the certification, inspection, and surveillance for major carriers under the direction of FG-14 inspectors.) 3. Exercises certificate authority and safety responsibility over a complex of broad and varied general aviation organizations such as air taxis, executive and/or industrial operators, repair stations, and flight mechanic schools when the activities monitored equate collectively to a major air carrier i s of size and complexity of aircraft fleet employed, scope and technical complexity of operations, management sophistication, industry leadership, and public impact. The magnitude, intensity, and scope of program responsibility are typically such as to require significant and regular assistance of lower graded inspectors. FG-14 employees evaluate maintenance programs for organizations which utilize complex aircraft, systems, and equipment. Because of organizational complexity or the advanced technology incorporated in the aircraft, systems, and equipment, employees must exercise originality to resolve unique problems. They frequently rely on engineers and designers for specific technical guidance although much of their work is carried out under very broad policy guidelines. Supervisors give FG-14 employees a wide leeway for independent action. Other inspectors seek their advice on problems relating to aircraft and their operation and maintenance. Because of the precedent-setting nature or substantial effect on the aviation industry or public safety, their decisions may be reviewed and approved at a higher policy-setting level. The ASI plans and directs the use of time and resources to accomplish organizational objectives. He or she defines, organizes, and uses resources to accomplish work activities within established schedules, analyzes program requirements and accomplishments, and makes or directs adjustments as necessary to address organizational needs. Requirements Conditions of Employment We are not accepting applications from noncitizens. Qualifications OPM General Schedule Qualification Standards for Aviation Safety Series, 1825 General Requirements for All Positions: Not more than two separate incidents involving Federal aviation regulations violations in the last 5 years; Valid State driver's license; Fluency in the English language; No chemical dependencies or drug abuse that could interfere with job performance; and High school diploma or equivalent Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, with or without a reasonable accommodation, and must meet all of the following requirements: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft. When the predominant work involves general aviation maintenance, applicants for Aviation Safety Inspector (Airworthiness) positions must meet all of the following requirements. Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness. Maintenance experience with aircraft 12,500 pounds or less maximum certificated takeoff weight. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state or Federal governmental agency. Aircraft maintenance work experience within the last 3 years. FAA Mechanic Certificate with airframe and power plant ratings. Note: Recency of specialized experience is waived for current and former FAA employees in the 1825 series. Certificate and Ratings: This position requires a certificate and ratings for minimum qualification in the following specialty: General Aviation Maintenance; a copy of the certificate and ratings are required for ALL candidates newly appointed to the FAA in the 1825 specialty of General Aviation Maintenance. Certificate and ratings must be submitted from current FAA employees applying for internal vacancies if they have never held this position with the FAA. Specialized Experience: To qualify for this position you must demonstrate in your application that you possess at least one year (52 weeks) of specialized experience equivalent to the (FV-I, FG/GS-13) level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position. Specialized Experience may include: experience assisting, conducting, or performing various technical functions related to certification, surveillance, investigation, and enforcement activities. Additional experience may be in investigating and reporting on accidents, incidents, and violations. QUALIFICATION REQUIREMENTS MUST BE MET BY THE CLOSING DATE OF THIS VACANCY ANNOUNCEMENT. As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA. In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration. Education Additional Information We may use this vacancy to fill other similar vacant positions. Position may be subject to a background investigation. A one-year probationary period may be required. The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty. FAA policy limits certain outside employment and financial investments in aviation-related companies. www.faa.gov/jobs/workinghere/financial-disclosure-requirements The U.S. Department of Transportation strives to ensure that equity, transparency, accountability, collaboration, and communication permeate all that we do for the betterment of the Department, the traveling public, and our nation. As such, DOT values a highly diverse workforce of persons who promote a culture of belonging by respecting the personal dignity and worth of each individual and fostering a positive environment where all feel safe and welcome. If these commitments coincide with your personal ideals and professional aspirations, please consider joining the DOT family. For Lateral Movements Between 1825 Specialties: To assist in determining qualification requirements, applicants transferring between specialties at the same grade level are strongly encouraged to complete the appropriate Qualifications Assessment Tool (QAT) check sheet and upload it along with their resume. Check sheets are contained in Order 3410.26, Flight Standards Service Air Carrier and General Aviation Qualifications Assessment Tool for AFS Aviation Safety Inspectors. This order is located at: https://www.faa.gov/documentLibrary/media/Order/3410.26.pdf Security Requirements: Moderate Risk (5): This position requires completion and favorable adjudication of a National Agency Check with Inquiry (NACI) background investigation prior to appointment, unless a waiver is obtained. Interviews: If the agency decides to interview any qualified employee on the selection list, then all on the list who are qualified must be interviewed. This position is covered by the PASS/AVS Bargaining Contract. Pay will be set IAW with Article 127. INCOMPLETE APPLICATIONS: Please ensure you answer all questions and follow all instructions carefully. Errors or Omissions may impact your rating or may result in you not being considered for the job. Your application/resume must have your official title, grade, series and employment dates in your work history. This is a bargaining unit position. This position is represented by PASS: Flight Standards Services. Links to Important Information: Locality Pay , COLA

DirectEmployers